Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.
If your Intex pool doesn’t have a skimmer, it might get dirty since there is no way of leaving debris and other leaves. However, you can easily remove all these debris by vacuuming your pool.
Thus, we want to look at how to vacuum Intex pool without skimmer.
Things You Will Need
You will need the following things;
Most vacuum heads are universally made to fit at the end of pool-cleaning poles. However, you should make sure that you get a head that is weighted to ensure that it floats on water.
- Telescoping Pole
Just like the vacuum heads and telescoping poles, vacuum hoses attach to most pool systems. Get a hose that will reach your pool area.
- Skim vacuum Plate
Vacuum Your Intex Pool Manually
Now you have everything you will need to vacuum your Intex pool without a skimmer. Follow these steps:
1. Prime the vacuum
First, prime the vacuum by removing all the air in the system. Air spaces will make your vacuum lose suction – remove all the air before you start vacuuming your pool to ensure that vacuum remains strong.
To prime your vacuum:
- Attach your vacuum head into your telescoping pole and submerge it into your Intex pool.
- Push the free end of the attachment against a jet to remove all the air.
- You will notice air bubbles coming up (let all the air come out).
2. Attach to the pump
The vacuum system runs by fixing it to the skimmer inlet that is powered by the suction of the pool system. Since your Intex pool doesn’t have a skimmer, this means that the inlet will be free (you don’t need to remove the skimmer).
Simply attach the open end of the vacuum hose into this inlet (the other end is attached to the vacuum head).
3. Vacuum your swimming pool
It is time to vacuum your Intex pool. Move the vacuum head around the surface of your swimming pool until it is clean.
You can repeat the first two steps if your vacuum starts to lose power when vacuuming your pool.
Clean the Equipment
Once you have cleaned your Intex pool thoroughly, detach the vacuum hose from the skimmer’s hole and wash the head and hose with fresh water to eliminate chemicals.
Pool chemicals can easily decrease the life of your equipment, so clean them well. Then, store these apparatus under shade to prevent the sun from degrading them.
It is very easy to clean an Intex pool without a skimmer and make ready for the swim session. All you need to do is to follow the above steps.